Made from .100 Thick Aluminum. Choose either our 15 or 20 Gallon tank with or without sending units. Fuel cell's come with -8AN Fittings for feed, vent, and return.
15 gallon tanks are 20" long x 18" wide x 10" tall.
20 gallon tanks are 24" long x 20" wide x 10" tall
Aluminum Racing Seats:
They feature a unique tubular rolled edge around the headrest, and there's an offset aluminum extrusion around the perimeter of the seat and shoulder harness cutouts. The exterior is TIG welded, and the inside is MIG welded for added strength.
Seat Mounting Brackets:
Universal seat brackets will mount your seat to your existing race vehicle. They're specially designed for our seats, but can also be used with any other seat.
Seat Belt Mounting Tabs:
Provides a professional and simple way of installing a 5-Point Safety Harness. Rugged 1/4"-thick steel mounting tabs can be welded to roll bars, seat anchors or other locations to provide secure attachment points. Includes 1/2" center holes for attaching harness. Five tabs per package; enough to install a complete harness.
5 Point Harnesses:
The harnesses feature a 3 in. lap belt, a 3 in. shoulder harness, and a 3 in. single submarine belt. The belts interlock with a proven latch-and-link release system. The harnesses are available in either black, blue, or red and are SFI approved for competition.
Roll Bar Padding:
The high density foam used to make these roll bar pads provides maximum safety and protection from impact. Installation holes are offset to position extra padding on the driver side, where it's needed the most. Multiple colors are available to match your vehicle's style. Package includes (4) 3' Lengths to surround the drivers area.
Battery Quick Disconnect:
These battery disconnect switches positively shut off all the current from the batteries and alternator in the event of a short or accident. They are rated at 175 Amps continuous and up to 1000 amps intermittent. They feature a double pole configuration for cars running alternators.